1. Welcome to the official forum for MINIX devices!
    Dismiss Notice

Official Release NEO X7 mini 010a firmware (11th Feb)

Discussion in 'NEO X7 mini Official Firmware Releases' started by MINIX - Ken, Jul 24, 2014.

  1. MINIX - Ken

    MINIX - Ken Former MINIX Team Member Administrator

    Dear X7 mini users,

    MINIX NEO X7 mini 20140211 (version 010a) 4.2.2 firmware
    Release Date: 2014-02-17

    Change log:
    1.) Improved video sync. performance;
    2.) Increased DDR frequency, improving overall performance;
    3.) Updated default video player;
    4.) Preloaded official XBMC MINIX Edition (Version 12.4 MINIX);
    5.) Preloaded latest AirPin(PRO), AirDroid, CloudTV app.;
    6.) Improved web camera support;
    7.) Preloaded Skype app.;
    8.) Battery status adjusted from 0% to 100%;
    9.) Enhanced HDMI signal strength;
    10.) Enabled OTA update protocol for future updates;

    Rule of thumb:
    DO NOT NEED TO UPGRADE if you're happy with your device's current performance.

    To upgrade any firmware please always use the "Restore" mode inside the RKBatchTool.exe. (V1.7)
    Please DO NOT use the "Upgrade" mode during any upadtes.


    Backup all data before you do the Restore, all data will be lost.

    ***After the computer indicates the restore process is done, system will reboot itself immediately and therefore
    you SHOULD NOT unplug the power for at least another 5 minutes to allow the rest of the recovery process to complete.
    We recommend you to do the flashing with the HDMI connected to a display so that the whole process can be seen on screen.
    Incomplete flashing will lead to firmware corruption and system abnormalities.***

    The latest NEO X7 mini 010a firmware is now available at: www.minix.com.hk/Support/14021719484990.html
    File Name: NEO_X7mini_20140211.rar
    MD5 checksum: cf7f3431451d6d7f1b2fd537efb6ba50
    (The whole upgrade process will take around 8 minutes, 3 minutes flashing restore through a PC,
    and 5 minutes to recover after restoring, please DO NOT unplug the power during the process until you enter the Android OS for the 1st time or system might be corrupted.)
    Note: Connect the USB cable to this port 1 to flash: