1. Registration issues have now been resolved. New accounts are able to be created

Stock firmware

Discussion in 'X8, X8 Plus, X8-H Official Firmware 007' started by MINIX - Ken, Jul 20, 2014.

  1. David Ewing

    David Ewing New Member

    Hi all my first post so please forgive if it is in the wrong section. Help really appreciated. I've issues with the hdmi out as I need to select which one manually to each film I play so that movement in the film is smooth. I'm moving from a popcorn hour that has a frame sync function that would do this automatically and the mini x 8h does not. I'm using a jvc dla 500 x projector and can also display 4k. What setting should I set the output or do I need to change it for a film that is 30 fpc then change it again for a film 23.9 fpc. This plays havoc with my projector and is a pain to see gittery movement when it was smooth with such an out dated player. Any help would be greatly appreciated because at this stage the minix is unusable.

    Cheers David.
  2. Rslynn46

    Rslynn46 Member

    David Ewing likes this.
  3. ENDRJUPL

    ENDRJUPL Well-Known Member Super Moderator

    Yes, first you have to flash beta 8 and install the addon @Rslynn46 mentioned.
  4. kaka

    kaka New Member

    I downloaded the original firmware in the official page. I wanted to install it on my Neo X8-H to delete the new firmware that just gave me problems in minix. My doubt is, how to do this installation using the pc, or directly in minix, through the boot? Thanks
  5. Higgs

    Higgs Yellow Dude Super Moderator

    Use this method;
    http://www.minixforum.com/index.php?posts/386

    Sent using Tapatalk
  6. chrissro

    chrissro New Member

    I need help please , I need to reflash minix ,I instaled usb burning tool , worldcup driver etc BUT I have this error log:
    11:53:42 845][Global][Inf]--Scan USB host controller complete
    [11:53:42 846][Global][Inf]--Update data center with HubMap
    [11:53:42 846][Global][Inf]--Update hub7 device data
    [11:53:42 846][Global][Inf]--Update HUB7-1
    [11:53:42 846][Global][Inf]--Update HUB7-2
    [11:53:42 846][Global][Inf]--Update HUB7-3
    [11:53:42 847][Global][Inf]--Update HUB7-4
    [11:53:42 847][Global][Inf]--Update HUB7-5 \\?\usb#vid_1b8e&pid_c003#5&d78caea&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [11:53:42 847][Global][Inf]--Update HUB7-6
    [11:53:42 847][Global][Inf]--Update HUB7-7
    [11:53:42 847][Global][Inf]--Update HUB7-8
    [11:53:42 870][HUB7-5][Inf]--Device is connected
    [11:53:42 870][HUB7-5][Inf]--Close device handle 0x00000438
    [11:53:42 921][HUB7-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&d78caea&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000438
    [11:53:43 034][HUB7-5][Inf]--------------DOWDLOAD DDR------------
    [11:53:46 036][HUB7-5][Inf]--1-0-0-0
    [11:53:46 052][HUB7-5][Err]--ctl_write return=-5, libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning.


    [11:53:46 053][HUB7-5][Err]--Write initial failed
    [11:53:46 553][HUB7-5][Err]--[11:53:47 053][HUB7-5][Err]--[11:53:47 061][HUB7-5][Err]--[0x11010601]RomCode????DDR,??????USB??
    This is the last part of the error log Capture.JPG
  7. chrissro

    chrissro New Member

    I ve try flashing from sd card but it won t work
  8. chrissro

    chrissro New Member

    Never mind :) I made it with the help of a usb fat 32 stick, I don t know why but sd card did not work for me
  9. Boaz

    Boaz Member

    I flash it yesterday from win 7 to 008 beta and it success to burn
  10. David Ewing

    David Ewing New Member

    Thanks a million! With some tweaking I got it to work. Now I need help allowing a torrent program write to my external hard drive then I can use this without my popcorn hour. Any tips?? When I use any torrent program it only allows me to write to the internal 16 gig hd.
  11. kaka

    kaka New Member

    Ok, thanks.
    I used this method when I installed the firmware that gave me problems, does installing this, just do not give me problems too?
  12. Higgs

    Higgs Yellow Dude Super Moderator

    Did you have problems with the stock firmware before upgrading?


    Sent using Tapatalk
  13. kaka

    kaka New Member

    Yes, after do it my Minix always blocking and must turn it off in the power line.
  14. kaka

    kaka New Member

    Before, no, no problems.
  15. Higgs

    Higgs Yellow Dude Super Moderator

    Then go back to stock firmware using the flash tool, make sure you set all options (normal erase etc) as stated in the guide.

    Sent using Tapatalk
  16. kaka

    kaka New Member

    The flash tools? Sorry,where is it?
  17. Higgs

    Higgs Yellow Dude Super Moderator

  18. zarbman

    zarbman Active Member

    No my minix complain X8H works perfectly, I have no reboots, applications work perfectly clear .... that can be improved and if so are. Many of you criticize and speak evil of the product, if there is a better one on the market which I doubt, sell yours and buy it but I tell you and all the other probe and none as complete as this with so little time in the market. and give that talk.

    The first firmware of the dreambox and also had many problems today are reference in the satellite world. So give the team time to give us a surprise.
    Boaz and Higgs like this.
  19. Rslynn46

    Rslynn46 Member

    I have had these issues and solved them with the help given on this forum. Unfortunately I'm not willing to help you!
  20. Adam

    Adam Member

    I find if you ask nicely and describe your issues you will get alot better response from members here!