1. Welcome to the official forum for MINIX devices!
    Dismiss Notice

Won't Boot Stuck at EFI

Discussion in 'NEO Z83-4' started by SDunker, Jun 10, 2018.

  1. SDunker

    SDunker New Member

    My Minix is has stopped booting up. I am getting the following

    First line reads "EFI Shell version 2.31 [4.651] - Current running mode 1.1.2" and below this I get a message "map: cannot find required map" and to press ESC before the time is up to skip startup.nsh.

    I have gone into the BIOS and disabled UEFI and it still doesn't work. It was working fine.

    Thanks for the help
     
    dufue1 likes this.
  2. dufue1

    dufue1 New Member

    shell.jpg

    i have the same problem
     
  3. MINIX - Martin

    MINIX - Martin Moderator Moderator

    If you type "exit", then you shall be able to enter into the Windows OS.
    This problem occurs because you have(maybe accidentally) set "UEFI AP:UEFI:Built-in EFI Shell" as the first boot option in the BIOS.
    You may go to BIOS by pressing F11 when attempting to power on the unit, and then go to 'Boot' > 'Boot Option Priorities'.
    Set 'Hard Disk:Windows Boot Manager' as the top priority.
    When it is set, this user interface will not show again when you power on.
     
  4. Villa

    Villa Administrator Administrator